Table of Contents
Advertisement
POWERLINK GM5 Wireless LAN 802.11b/g/n Ultra High Power USB Adapter
Getting Start
Minimum System Requirements
Pentium
At least one available USB 2.0 or 1.1 port
At least one built-in NIC interface.
The installation CD
5Mbytes free hard disk space.
Windows, XP, XP professional, Vista, or Windows 7.
Before you proceed with the installation, please notice the following descriptions.
1.
Windows XP users must install SP3 or above.
2.
If you have installed the WLAN USB driver & utility before, please uninstall the old version first.
3.
The installation guide herein is operated under Windows system. For Linux or Mac driver
installation guide, please refer to the instruction in README at directory the driver has stored in
CD-Rom.
4.
Give-Me-Five wireless adapter can only act as a normal wireless adapter, without the advance
function the Give-Me-Five have.
5.
Many WLAN chipset vendors have provided proprietary UI. If users already have pre-installed
WLAN adapter on system. We strongly suggest to turn off proprietary UI and switch to Windows
zero configuration instead.
Windows 7 Users
To install
level of UAC (User Account Control) settings to "Never Notify". For Windows Professional and Ultimate
Edition users, in addition to change UAC settings, enable and switch to Windows built-in Administrator
account get the most performance of operation.
All contents are subject to change without notice. All trademarks are the property of their respective owners.
®
300 MHz or higher compatible processor
utility support Windows operating systems only. Linux and MAC users
utility and execute. Windows 7 Home Edition users have to change notification
For more info, please visit www.premiertek.com
Advertisement
Table of Contents
