Unpacking; Product Identification; Local Codes; Optional Remote Control Accessories - Superior BGE18NR Operation Instructions Manual

CAUTION: Do not remove the
data plates from the grate as-
sembly. The data plates contain
important warranty and safety
information.
1. Remove logs and heater base assembly
from cartons.
Left Side
Log Set
Ignitor
Front
Install and use heater with care. Follow all
local codes. In the absence of local codes,
use the latest edition of The National Fuel
Gas Code, ANSI Z223.1/NFPA 54*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269

OPTIONAL REMOTE CONTROL ACCESSORIES

There are five optional remote controls that
can be purchased separately:
• wall switch
• hand-held ON/OFF remote
• wall thermostat
126829-01A

UNPACKING

PRODUCT IDENTIFICATION

Base Assembly
Figure 1 - Product Identification

LOCAL CODES

www.SuperiorFireplaces.US.com
Note: Do not pick up heater base assem-
bly by burners. This could damage heater.
Always handle base assembly by grate.
2. Remove all protective packaging applied
to logs and heater for shipment.
3. Check heater for any shipping damage.
If heater is damaged call INNOVATIVE
HEARTH PRODUCTS at 1-800-655-
2008 for replacement parts before return-
ing to dealer.
Control
Knob
State of Massachusetts: The installa-
tion must be made by a licensed plumber
or gas fitter in the Commonwealth of
Massachusetts.
Sellers of unvented propane or natural
gas-fired supplemental room heaters shall
provide to each purchaser a copy of 527
CMR 30 upon sale of the unit.
Vent-free gas products are prohibited for
bedroom and bathroom installation in the
Commonwealth of Massachusetts.
• hand-held thermostat remote
• touch screen hand held remote
See Accessories, page 39.
The wall thermostat or hand-held thermostat
may not be used where vented decorative
listing is required.
Rear Burner
Right Side
Flame Adjustment
Knob
5