Table of Contents
Advertisement
This transceiver provides you with 10 dedicated DTMF
Memory Channels. You can store a DTMF number (16
digits max.) in each of these channels to recall later for
speed dialing.
Many repeaters in the U.S.A. and Canada offer a service
called Autopatch. You can access the public telephone
network via such a repeater by sending DTMF tones. For
further information, consult your local repeater reference.
MANUAL DIALING
The keys on the Mic keypad function as DTMF keys; the
12 keys found on a push-button telephone plus 4
additional keys (A, B, C, D).
To perform Manual Dialing, follow the steps below.
1 Press and hold Mic [PTT] to transmit.
2 While transmitting, press the keys in sequence on the
keypad, to send the DTMF tones.
10
• The corresponding DTMF tones are transmitted.
F
e r
. q
H (
) z
2 1
9 0
1
6
7 9
4
7
0 7
7
8
2 5
9
1 4
50
DUAL TONE MULTI-FREQUENCY (DTMF) FUNCTIONS
3 1
6 3
4 1
7 7
6 1
2
3
A
5
6
B
8
9
C
0
#
D
• When DTMF TX Hold is activated {page 51}, you do not
need to continuously press Mic [PTT] to remain in
transmission mode. However, transmission mode is
retained for only 2 seconds after pressing a key, so if the
next key is not pressed within this time limit, the
transceiver stops transmitting.
DTMF M
ONITOR
When pressing the Mic DTMF keys, you will not hear
DTMF tones emitted from the speaker. However, you
can monitor the DTMF tones if desired.
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 33 (DT.M).
2 Press [MENU] and turn the Tuning control to select
"ON" or "OFF" (default).
3 Press [MENU] to store the setting or any other key to
3 3
cancel.
4 Press any key other than [MENU] to exit Menu Mode.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
