Kenwood TM-271 Instruction Manual page 17

y
Appears when the Automatic Simplex Check (ASC)
function is activated {page 26}.
u
Appears when the Priority Scan function is activated
{page 43}.
i
Appears when the Weather Alert function is activated
{page 36}. (K market models only.)
o
Appears when narrow FM Mode is selected {page 60}.
!0
Displays the frequencies, Menu settings, Memory name
and other information.
!1
Displays the Menu No., Memory Channel number, and
status {pages 18, 29}.
!2
Appears when the displayed Memory Channel has data
{page 29}.
!3
Appears when the Key Lock function is ON {page 58}.
!4
Appears when the Memory Channel Lockout function is
ON {page 44}.
!5
Shows the strength of transmitted {page 15} and received
{page 54} signals.
indicates the squelch is open and the frequency is
"busy". It also appears when the squelch is set to
minimum {page 14}. If using CTCSS or DCS, it indicates
the squelch is open due to a received signal that
contains the same CTCSS tone or DCS code that is set
in your transceiver.
receiving and an RF power meter while transmitting.
indicates the transceiver is transmitting.
!6
Appears when the function key is pressed.
!7
H appears when high power transmission is selected
and L appears when low power is selected {page 15}.
("M" is not used on this transceiver.)
acts as an S-meter while
11
3