Installation In A Vehicle - Kenwood KTC-H2A1 Instruction Manual

Installation in a vehicle with the KPA-H2C kit (available separately)
Note: Do not put Here Anywhere in the docking station until you have completed the installation.
2
1. Determine where you want to mount 2. You can bend the leaves on the base to
Here Anywhere. conform to curved mounting surfaces.
2
• Do not install Here Anywhere where
2
it may obstruct your view through
the windshield or your view of your
vehicle's indicator displays.
• Do not install Here Anywhere where
2
it will hinder your access to the
vehicle's controls.
• Do not install Here Anywhere where
2
it may hinder the function of safety
devices such as an airbag. Doing so
3. Peel the covering away from the adhesive on
may prevent the air-bag from func-
the bottom of the base and adhere it to the
tioning properly in the event of an
mounting surface. Use the provided screws
accident.
to securely attach the base to the surface.
• Find a location that provides good
• If using screws, be sure that you do not
visibility of and access to
damage wiring or other systems on the
Here Anywhere's front panel.
other side of the mounting surface.
2
• Kenwood strongly recommends that
you mount Here Anywhere in a
2
location where the base can be
attached with the provided screws.
6
4. Using the provided screw,
assemble the docking station
cradle to the base.
Here Anywhere Instruction Manual
2
Installation in a vehicle (continued)
5. Plug the cigarette lighter adapter 6A. Plug the cassette adapter
into the back of the cradle, as shown. into the back of the cradle,
Don't plug the adapter into the ciga- as shown.
rette lighter until the installation is
completed (see pg. 8, Step 4).
Here Anywhere Instruction Manual
2
6B. If your car stereo has an aux input, plug
the supplied audio cable into the back
of the cradle instead of the cassette
adapter. Plug the audio cable's white
(L ch,) and red (R ch.) connectors into
your car stereo.
7