Canon ZR 850 Instruction Manual page 67

4
Press
PAUSE
• Audio device: Begin
playback.
• Microphone: Speak into the
microphone.
5
Press to stop dubbing.
STOP
Audio device: Stop playback.
IMPORTANT
Audio dubbing will stop if the tape has a blank
section or a section recorded in LP mode or
[ 16bit] audio.
You cannot use the DV terminal for audio
dubbing.
The quality of the dubbed sound will not be as
good when dubbing audio to a tape that was not
recorded with this camcorder or after having
dubbed audio over the same scene more than 3
times.
NOTES
While dubbing audio using the built-in
microphone: You can connect the camcorder to
a TV to check the picture on the TV screen and
check the sound through headphones
connected to the TV.
While dubbing audio using an
external audio device: You can check the
picture on the camcorder's LCD screen and the
sound through the built-in speaker or the audio
device.
T S A
O ELECT THE UDIO
You can select the audio track that will be
played when playing back a tape that was
audio dubbed ( 51).
to begin dubbing.
T P
RACK FOR LAYBACK
Connecting to a TV or VCR 67