ACU-RITE 00639W Instruction Manual
  1. Manuals
  2. Brands
  3. ACU-RITE Manuals
  4. Weather Station
  5. 00639W
  6. Instruction manual

ACU-RITE 00639W Instruction Manual

Hide thumbs Also See for 00639W:
Table of Contents

Advertisement

Quick Links

CONTENTS
Package Contents .................. 2
Product Registration ............... 2
Features: Display Unit ............ 4
Setup .................................... 7
3-in-1 Sensor Setup ................ 7
Display Unit Setup ................. 8
Set the Time & Date ............... 9
Measurement Units ...............10
Questions?
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Placement Guidelines ............ 11
Programmable Alarms ...........14
Troubleshooting ....................15
Care & Maintenance .............16
Specifications ........................17
FCC Information ...................17
Customer Support .................18
Warranty..............................18
Contact Customer Support at
Instruction Manual

Weather Center

model 00639W

Advertisement

Table of Contents
loading

Related Manuals for ACU-RITE 00639W

Summary of Contents for ACU-RITE 00639W

  • Page 1: Table Of Contents

    Instruction Manual Weather Center model 00639W CONTENTS Unpacking Instructions ... 2 Placement Guidelines .... 11 Package Contents ....2 3-in-1 Sensor Installation ..12 Product Registration ....2 Using the Weather Center ..13 Features & Benefits: 3-in-1 ..3 Programmable Alarms ...14 Features: Display Unit ....

  • Page 2: Unpacking Instructions

    Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.

  • Page 3: Features & Benefits: 3-In-1

    Features & Benefits 3-in-1 SENSOR 1. Temperature & Humidity Sensors 5. Mounting Hardware (internal) Includes anchors and screws. Diameter Length 2. Release Lever for Battery Access 1” 3. Mounting Point #6 or #8 1/4” or 3/8 4. Wind Speed Anemometer 6.

  • Page 4: Features: Display Unit

    Features & Benefits Display Unit 13 14 15...
  • Page 5 DISPLAY UNIT 1. History Chart Icon 16. Records Button Press for all-time low and date Indicates data is currently displayed on the History Chart (#4). recorded for current category selected on display (#14). Press twice 2. Current Wind Speed for all-time high and date recorded. 3.
  • Page 6 Back of Display Unit BACK OF DISPLAY UNIT 1. CLEAR TODAY Button 4. RESET REC Button Clears data recorded since 12:00am. Resets all readings except time & date. 2. RESET Button 5. Battery Compartment Full reset to factory defaults. 3. A-B-C Switch 6.

  • Page 7: Setup

    SETUP 3-in-1 Sensor Setup Set the A-B-C Switch function improperly. Use lithium batteries in the 3-in-1 sensor for The A-B-C switch is located inside temperatures below -4ºF / -20ºC. the battery compartment. It can be set to A, B or C. However, 1.

  • Page 8: Display Unit Setup

    Display Unit Setup AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. Set the A-B-C Switch Install or Replace Batteries Locate the A-B-C switch inside 1. Remove the battery the battery compartment. Set compartment cover.

  • Page 9: Set The Time & Date

    Set the Time & Date The clock and calendar are utilized to time stamp history records and other data, so it is important to set the time and date soon after you power on the display unit. Set the Time 1.

  • Page 10: Measurement Units

    Select Measurement Units To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.): 1. Press the “▲” or “▼” buttons until “SET UNITS?” is displayed on the Selectable Category part of the display unit. 2. Press the “SET” button to set the unit preference.

  • Page 11: Placement Guidelines

    Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. To ensure accurate temperature measurement, place out of direct sunlight and away from heat sources or vents.

  • Page 12: 3-In-1 Sensor Installation

    3-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at a minimum height of 5 feet (1.5 meters) off the ground, in an open area. Higher is better for wind measurements. The National Weather Service recommends 33 feet high! MOUNTING OPTIONS The included mounting bracket is designed to screw directly onto wooden posts or surfaces that are 2”x 4”...

  • Page 13: Using The Weather Center

    OPERATION Using The Weather Center Learning Mode Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.

  • Page 14: Programmable Alarms

    Programmable Weather Alarms Each Selectable Weather Category features an alarm option. When an alarm sounds, the display unit emits an audible beep and flashes the affected category, its alarm settings, and any other relevant data. Some alarms can be customized to alert you when your programmed value is reached.

  • Page 15: Troubleshooting

    Troubleshooting Problem Possible Solution • Relocate the display unit and/or the 3-in-1 sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).

  • Page 16: Care & Maintenance

    Problem Possible Solution • Weather Forecast icon predicts conditions for the next 12 to 24 hours, not current conditions. • Has Learning Mode icon disappeared from the display unit? Learning Mode must complete before forecast and pressure will be accurate. Inaccurate forecast •...

  • Page 17: Specifications

    Specifications TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC Indoor: 32ºF to 122ºF; 0ºC to 50ºC HUMIDITY RANGE Outdoor: 1% to 99% Indoor: 16% to 98% WIND SPEED 0 to 99 mph; 0 to 159 kph WIRELESS RANGE 330ft / 100m depending on home construction materials OPERATING FREQUENCY 433 MHz...

  • Page 18: Customer Support

    Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www. .com Installation Videos Register your Product...
  • Page 20 Weather Temperature Weather Kitchen Clocks Stations & Humidity Alert Radio Thermometers & Timers It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with confidence ™...

Table of Contents