Structural Features
Internal structure of the main unit
●
The internal structure of the main unit is straightforward: employing a die-cast aluminum chassis, it
is designed so that the circuit boards are attached from both above and below. From above one
can see the TX/RX unit, the filter unit and the relay unit; seen from below, there are the RF unit and
the final unit (or final/AT unit, in the case of the SAT model). There is also a separate display unit in
the standalone control panel.
Figs. 23~25 illustrate the arrangement of these units.
Fig.23 : View from above (both models)
Filter unit
Relay unit
TX /RX unit
Final unit
RF unit
Fig.24 : View from below (TS-480HX)
Final /AT unit
RF unit
Fig.25 : View from below (TS-480SAT)
37