Features - Kenwood TM-201B Instruction Manual

1. FEATURES
© Compact, slim transceiver for
easy mobility
® Microcomputer provides
multi-frequency control
functions
* Dual function keyboard
facilitates memory recall (MR)
¢ High reliability by using PC
boards for each unit; high
sensitivity (12 dB SINAD
0.22 yV) front-end using
GaAs FETs
* Quality sound for transmission
and reception
* HI/LOW switch controls output
power
* Repeater operation
© Extended frequency range*
Coaxial connector with cable greatly reduces effective depth when connec-
ting an antenna cable
. External speaker system allows installation in any place.
. Remote frequency control unit (FC-10) extends your operation a flexibility. wn
Five channel memories plus COM channel.
ALERT function monitors memory channel 1 (M1).
Memory scan operation (MS) from memory channels 1 through 5.
Programmable scan within the selected frequency range.
1 MHz step-up function (MHz).
. VFO A in 5 kHz (25 kHz; for European and British versions) steps; VFO B in
5 kHz steps.
7. Beeper indicates each of 7 modes.
Onbwnns
External communications speaker, 77 mm in dia., supplied.
Maximum 3% modulation distortion ensures good quality transmit signal
nee
COM system facilitates access to repeaters with the TU-3 or TU-3A tone
unit® (option) installed.
2. The TU-3 or TU-3A 2nd tone frequency (one of 37 frequencies selectable)
interconnected with the TX OFFSET system enables access to a repeater
3. The REV switch monitors direct signal.
Covers 142.0~ 148.995 MHz in 5 kHz steps.
{Specifications guaranteed for the 144 ~ 148 MHz Amateur band only}