Ford 2007 F-650 Owner's Manual page 18

Rims:
Lug nuts:
Hub oil seal:
Oil-lubricated front
wheel bearing:
If a wheel must be changed, obtain expert tire service help.
Mounting and un-mounting of tires should only be performed by
a qualified technician using necessary safety procedures and
equipment, otherwise the result could be property damage, personal
injury or death.
Fuel tank:
Leaks:
Driveshaft:
Exhaust system:
2007 F-650/750 (f67)
Supplement
USA (fus)
Vehicle Inspection Guide
Front wheels
Check for damaged or bent rims. Rims should
not have welding repairs and no rust trails that
indicate it is loose on the wheel.
Make sure all lug nuts are present and not
loose (look for rust trails around the lug nuts).
There should be no cracks radiating from the
lug bolt holes or distortion of the bolt holes.
Check wheel hub oil seal for leaks, and if sight
glass if present, check to see that the oil level
is adequate.
If the hubcap has a transparent window, check
for proper lubrication level. If the hubcap does
not have a transparent window, remove the
rubber fill-plug and check for proper level.
Driver/Fuel area
Make sure the fuel tank and caps are secure.
Make sure there is no damage to the tank.
Check for any leaks from the fuel tanks.
Underbody of vehicle
Make sure that the driveshaft is not bent or
cracked. Ensure all driveshaft couplings are
secure.
Make sure the outside visible parts are
securely mounted. Make sure there are no
cracks, holes or severe dents.
17