Operation - HomComfort EWH38 Operation Manual

Operation

The main power switch is located on the right side of the unit. To turn on
the fi replace, toggle the main power switch ON. There are also (4) buttons
and (4) LED lights
P r e s s t h e P O W E R
b u t t o n t o t u r n t h e
electric fireplace ON.
When the fi replace is
on, it will be indicated
by (1) illuminated red
LED.
The status light above shows that the power
is ON and the heater is OFF. The backlight
To turn the heat on low
(lightbulb symbol) LED is always ON.
press the LOW button.
To turn the heat on high
press the HIGH button.
The dimmer button is
used to decrease the
brightness of the fl ame
The status light above shows that the power is
and embers. Press the
ON and the heater is on LOW. To turn the heat
dimmer button once
OFF from this setting, press LOW again
and you will hear a beep
and the brightness will
decrease by a singe
brightness setting.
There are 15 preset
brightness settings.
When the fireplace
ceases to beep after
the dimmer button is
The status light above shows that the power is
pressed, it is on its ON and the heater is on HIGH, to turn the heat
d a r k e s t b r i g h t n e s s
OFF from this setting hit the HIGH button once.
setting.
more