Box Contents
(1) Mounting Bracket
(2) For EWH95
(1) Fire Unit
(1) Glass Face
Unpacking and Testing
Carefully remove unit from box. Prior
to permanently installing unit, test to
make sure unit operates properly. To
do this, plug unit's power supply cord
into a conveniently located 120-volt
grounded outlet.
CAUTION: The unit's power supply
cord must be connected to a properly
grounded and protected 120-volt
outlet. Always use ground fault
protection where required by the
electrical code.
(1) Remote
(1) Fastener Package
(2) for EWH95
WARNING: Do not operate the
unit if it is damaged or has mal-
functioned. If you suspect the
unit is damaged, return the unit
to an authorized service facility
for examination, electrical or
mechanical adjustment or re-
pair.