Sony HDR-PJ260 Service Manual page 6

Ver. 1.1 2012.01
The changed portions from
Ver. 1.0 are shown in blue.
6) Click the [File Update] button in the window.
7) A file selection screen opens. Select the Destination Data file to be added and click the [Open] button.
8) When the file has been successfully added, the following window opens.
9) Check the Destination Ver. window and confirm that the version has been updated.
HDR-PJ260/PJ260E/PJ260V/PJ260VE/XR260E/XR260V/XR260VE_L2
Destination Ver. window
1-4. PRECAUTION ON REPLACING THE MS-478 BOARD
Angular Velocity Sensor
When you replace to the repairing board, write down the sensitivity displayed on the angular velocity sensor SE7501 (PITCH/YAW).
Start the Adjust Manual in the Adjust Station and execute the "GYRO sensor sensitivity adj".
MS-478 BOARD (SIDE B)
SE7501
PP
PP: PITCH sensor sensitivity
YY
YY: YAW sensor sensitivity
Note: The sensor sensitivity of SE7501 (PITCH/YAW) on MS-478 board is written only repair parts.
1-3
G1
G2