RC Logger RC EYE One S 88005RC Operating Instructions Manual page 24

88006rC (mode 2) rudder
Rudder denotes the rotation of the "RC EYE One S" around the rudder axis (vertical axis). This movement
either occurs unintentionally due to the speed torque of the propellers or intentionally as a flight direction
change. For the "RC EYE One S", this movement is not controlled by a tail propeller, but through speed
variation of the individual propellers to each other. The two red propellers show "front".
If you move the left control lever (figure 6a) to the left, the "RC EYE One S" will turn to the left. If you move
the control lever to the right, the "RC EYE One S" will turn to the right. If the "RC EYE One S" turns slowly
to the left in hover flight (direction of the white arrow), the model must be trimmed with the black trimming
button (also in the counter-direction). Push the trimming button until the "RC EYE One S" no longer turns
away to the left.
Figure 6a
24