Let's Recording; Recording On Tape - Kenwood HM-331 Instruction Manual

Let's recording

22

Recording on TAPE

0
push open
2 2
direction
TAPE
VOLUME / multi control
menu
set/demo
Stop the recording Pause the recording
1. Load a tape in deck.
1 Open the door of deck.
2 Insert a tape.
1 1
3 Close the door.
2. Select the tape transport direction.
To reverse the transport direction
1 Press the play key.
2 Press the play key again.
3 Stop playback.
2 2
Check the tape transport direction indicator.
3. Set the recording condition.
Select the reverse mode.
3 3
Note that this cassette deck cannot record onto
Note Note
Metal tapes.
5 5
3 3
4 4
2 2
2 2
1 1
Stop the recording
÷ Differentiation between normal
(TYPE ) and high (TYPE ) tape is
set automatically.
÷ Remove tape slack before loading.
÷ When recording is started, the tape is
transported in the direction selected in
this step.
÷ Wind the tape to the position where
recording is to be started.
(
HM-331 (En/T)
3 3
*