Call Log; Restore Default Settings; Phonebook; Record An Announcement - Philips D200 User Manual

Enjoy
4

Phonebook

Add record
1 Press .
2 Select [Phonebook] > [Add new].
3 Follow on-screen instructions.
Call from the phonebook
1 Press .
2 Select a record and press
.
Direct access memory
You have 2 direct access memories (Keys 1 and 2).
To dial the saved phone number automatically, press
and hold on the keys in standby mode.
Depending on your country, keys 1 and 2 are
preset to [1_voicemail] (voice mail number) and
[2_info svc] (information service number) of your
network operator respectively (network dependent).

Call log

Call from the call log
1 Press .
2 Select a record and press
.
Add record
1 Press > > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press > [Delete].
>
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press .
2 Select a record and press .
Add record
1 Press > > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press > > [Delete].
2 Follow on-screen instructions.

Record an announcement

(for D205 only)
1 Press
.
2 Select [Answ. Machine] > [Announcement].
3 Follow on-screen instructions.

Register additional handsets

You can register additional handsets to the base
station.
1 Press .
2 Select [Services] > [Register], then press
to confirm.
3 Press and hold
on the base station for 5 seconds.
4 Enter the system PIN/passcode (0000).
5 Press to confirm the PIN/passcode.
Registration is complete in less than 2 minutes.
»

Restore default settings

You can reset your phone settings to the original
factory settings.
1 Press .
2 Select [Services] > [Reset], then press
confirm.
3 Follow on-screen instructions.
Note
• You may recall the original PIN/Passcode by
following this procedure.
to