Table of Contents
Advertisement
Adding the OK mark
When recording of a clip ends, press the
assignable button to which you assigned the
OK Mark function.
While standing by to record, you can also add an
OK mark to the last-recorded clip ("Last Clip")
on the selected memory card.
Deleting the OK mark
Press the assignable button to which you
assigned the OK Mark function, and select
"Execute."
While standing by to record, you can also delete
the OK mark from the clip with the last-added OK
mark.
Adding or deleting the OK mark to or from
clips before the last one
Make changes via the thumbnail screen.
For details on making settings, see "Adding/Deleting
the OK Mark (FAT HD Mode Only)" (page 71).
Rec Review
You can review the last recorded clip on the
screen (Rec Review).
Press the REC REVIEW button (PMW-
300K1)/RET button (PMW-300K2) (page
15) after recording is finished.
If the Rec Review function is assigned to an
assignable button (page 49), you can also use that
button.
The last 3 seconds, 10 seconds, or the entire part
of the clip is displayed, depending on the "Rec
Review" setting (page 85) in the CAMERA SET
menu.
Rec Review is terminated at the end of the clip,
resuming STBY (recording standby) status.
To interrupt Rec Review
Press the REC REVIEW button (PMW-300K1)/
RET button (PMW-300K2), STOP/CAM button,
or the assignable button to which you assigned the
Rec Review function.
Notes
• During Rec Review playback, the playback control
buttons other than the STOP/CAM button are disabled.
• If the video format was changed after recording, Rec
Review cannot be performed (except when the change
was from SP 1440×1080/23.98P to SP 1440×1080/
59.94i).
• The Setup and PICTURE PROFILE menus cannot be
operated during Rec Review.
Assignable Buttons
The camcorder has eight assignable buttons (page
11) to which you can assign various functions for
your convenience.
To change functions
Use "Assign Button" (page 101) in the OTHERS
menu.
The assigned functions can be viewed on the
Button/Remote status screen (page 76).
Interval Recording
The Interval Recording (time-lapse recording)
function is especially effective for shooting
objects that move very slowly.
The specified number of frames are automatically
recorded at the specified intervals.
Recording interval (Interval Time)
Number of frames for one recording session
(Number of Frames)
It is recommended to fix the camcorder to a tripod
or equivalent and use the IR Remote Commander
to start/stop recording rather than pressing the
REC START/STOP button of the camcorder.
Notes
• Audio cannot be recorded in Interval Recording mode.
• Interval Recording cannot be set to "On"
simultaneously with Frame Recording, Picture Cache
Recording, Slow & Quick Motion, or Clip Continuous
Recording. When you set Interval Recording to "On,"
these other functions are forcibly set to "Off."
• Interval Recording mode cannot be used when
"Format" in "System" (page 102) in the OTHERS
Useful Functions
49
Hide quick links:
Advertisement
Table of Contents
