Sony PMW-300K2 Operating Instructions Manual page 104

OTHERS
Menu items
Clip
Setting for clip
name or deletion
104 Setup Menu List
Subitems and setting values Contents
Auto Naming
C**** / Title / Plan
Title Prefix
nnn_ (nnn=least three digits of
the serial number)
(Max. 7 characters displayed)
Number Set
0001 to 9999
Update
Media(A) / Media(B)
Last Clip DEL
Execute / Cancel
All Clips DEL
Execute / Cancel
Filter Clips
OK / NG / KP / None
Lock All Clips
Execute/Cancel
Select the method to specify clip names.
C****: UDF only
Title: To specify as desired by "Title Prefix"
Plan: To use a name specified in planning metadata (if no
name is specified in planning metadata, the name
specified by "Title Prefix" is used.)
Call the Character Set screen to set the title part (4 to 46
characters) of the clip names.
Configuration of the Character Set screen
Character selection area (3 lines):
To select a character to insert in the cursor position of the
Title Prefix area.
!#$%()+,-.=@[]^_~0123456789
abcdefghijklmnopqrstuvwxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
Cursor operation area (1 line):
Space: To change the character in the cursor position to a
space
INS: To insert a space in the cursor position
DEL: To delete a character in the cursor position
T: To move the cursor to the left
t: To move the cursor to the right
ESC: To cancel the change and exit the Character Set
screen
END: To validate the change and exit the Character Set
screen
Title Prefix area (1 line):
For entering the title
To set the title
1
Using the joystick, select (highlight) a character in the
character selection area to be entered in the cursor position
of the Title Prefix area. Then press the SEL/SET button or
the jog dial.
2
Repeat Step 1 for setting the title. (Use Space, INS, and
DEL as required.)
3
When the title setting is completed, select END to exit the
Character Set screen.
Set the second 4-numeric part of the clip name.
Set a five-digit number for a planning metadata file.
To update the managerial file on the SxS memory card in the
1)
selected slot.
Select "Execute" to delete the last recorded clip.
Select "Execute" to delete all clips on the active SxS memory
card.
Note
Clips to which you applied OK mark and clips that are locked
cannot be deleted.
Select from among "OK" (the OK flag), "NG" (the not good
flag), "KP" (the keep flag), or "None" (for no flag) to filter
displayed clips. (UDF only)
Select "Execute" to protect all clips. (UDF only)