Table of Contents
Advertisement
Bottom
1.
Tripod receptacles
Note
Check that the size of the hole matches the screw of
the tripod. If they do not match, the camcorder
cannot be attached to the tripod securely, and this
may lead to the physical injury of the camera
operator.
2.
Backup battery holder (page 131)
The backup battery holder is exposed when
the breast pad is pulled out.
Zoom Lens (Supplied)
PMW-300K1
Lens control block (page 14)
Controls on the grip
(page 15)
ZOOM
MANU
SERVO
LENS
REMOTE
OF F
ON
Cover of the lens
control block (See
"Note" below.)
PMW-300K2
Lens control block (page 14)
Controls on the grip
(page 15)
1.
Lens hood
2.
Lens cap open/close lever (page 38)
(PMW-300K1 only)
3.
ZOOM switch (page 44)
4.
LENS REMOTE connector (page 44)
5.
F.f. button (PMW-300K2 only)
Press when adjusting the flange focal length
(distance from the mounting flange to the
film plane) (page 27).
Note
The lens is properly adjusted at the factory. Do
not touch the controls of the lens control block.
Part Identification
13
Hide quick links:
Advertisement
Table of Contents
