Wan Connection - D-Link DIR-632 Quick Installation Manual

Multifunction wireless router supporting wimax, 3g gsm/cdma with built-in 8-port switch

Hide thumbs Also See for DIR-632:

Table of Contents

DIR-632

3G WAN Connection

If the PIN code check is enabled for the SIM card inserted into your USB

modem, then prior to creating a 3G WAN connection, proceed to the USB

modem menu and enter the PIN code on the page displayed.

1. Go to the Net / WAN page and click the Add button.

In the General settings section, from the Provider drop-down list,

select your country and operator to automatically specify all settings

required to connect to the Internet. To specify all settings independently,

leave the Manual value.

From the Connection Type drop-down list, select the 3G value.

4. From the Port drop-down list, select the USB value.

Specify a name for your connection (any name for easier identification) in

the Name field.

If you need to specify other settings, in the PPP Settings section, enter

authorization data provided by your operator (the username (login) in the

PPP Username field and the password in the Password and

Password

authorization checkbox if authorization is not required. In the APN

field, enter the access point name, and in the Dial number field, enter

the number dialed to connect to the authorization server of the operator.

7. Click the Save button.

8. On the Net / WAN page, select the choice of the Default gateway

radio button corresponding to the new 3G WAN connection.

confirmation

Quick Installation Guide

fields),

select

the

Without

Table of Contents