D-Link DIR-632 Quick Installation Manual page 14

DIR-632
10. For connection of PPTP + Static IP or L2TP + Static IP type: in the IP
section, fill in the IP Address, Netmask, Gateway IP Address, and
Primary DNS server fields. Then in the VPN section, enter
authorization data provided by your ISP (the username (login) in the PPP
Username field and the password in the Password and Password
confirmation fields), or select the Without authorization checkbox if
authorization is not required. In the VPN server address field, enter
the IP or URL address of the PPTP or L2TP authentication server. If your
ISP applies encryption, select a needed value from the Encryption drop-
down list.
11. For connection of PPTP + Dynamic IP or L2TP + Dynamic IP type: if
your ISP has provided the address of the DNS server, in the IP section,
deselect the Obtain DNS server addresses automatically
checkbox and fill in the Primary DNS server field. Then in the VPN
section, enter authorization data provided by your ISP (the username
(login) in the PPP Username field and the password in the Password
and Password confirmation fields), or select the Without
authorization checkbox if authorization is not required. In the VPN
server address field, enter the IP or URL address of the PPTP or L2TP
authentication server. If your ISP applies encryption, select a needed
value from the Encryption drop-down list.
12. Click the Save button.
13. On the Net / WAN page, select the choice of the Default gateway
radio button corresponding to the new WiMAX WAN connection.
Quick Installation Guide
14