Plustek OpticFilm 120 User Manual page 22

Open the film holder and place the filmstrip in the film holder with the emulsion (non-
glossy) side down. Always align the film towards the direction of insertion. The
direction of insertion is indicated by a white square and an arrow. When scanning a
single filmstrip or filmstrips of different lengths, please use the included masking sheets
to cover any open frames, then close the film holder cover.
Arrow
Direction of insertion
Open the film holder and place the filmstrip in the film holder with the emulsion (non-
glossy) side down. Always align the film towards the direction of insertion. The
direction of insertion is indicated by a white square and an arrow. Adjust the individual
frames to fit the size of the images on your film, then close the film holder cover.
Arrow
Direction of insertion
19