Setting the Menu (Continued)
Selecting the Color System (MODE)
You can select one of the following modes for the Color system.
AUTO: Automatically selects PAL or NTSC according to the video signal received.
PAL:
Sets PAL for the Color system.
NTSC: Sets NTSC for the Color system.
1
Press the MENU button to select "MODE".
2
Press the MENU SET 5/∞ button to select the Color system.
Each time you press the button, the setting changes as follows:
MODE
AUTO
PAL
Selects AUTO.
Setting COLOR/TINT/PICTURE
You can make the following adjustments in each menu item.
COLOR: Depth of color
TINT:
Tint
PICTURE: Picture quality
1
Press the MENU button and select "COLOR", "TINT" or "PICTURE".
2
Press the MENU SET 5/∞ button to adjust each of them.
Each time you press the button, the value changes in the range 0 to 100.
[Color adjustment sample]
Initial Resetting
You can get the menu settings back to state at the time you purchased the system.
While pressing the MENU button, turn on the POWER switch.
8
EN
NTSC
MODE
Selects PAL.
COLOR
TINT
PICTURE
MENU
+
AUTO
PAL
NTSC
82
50
50
POWER
OFF
ON
MODE
AUTO
PAL
NTSC
Selects NTSC.