Installation - Kenwood KVT-915DVD Instruction Manual

Connection
Connection for AV Equipments
PREOUT
SUB
(MONO) REAR
AV INPUT 1 AV OUTPUT
VIDEO L R L VIDEO L L
FM /AM ANTENNA AV INPUT 2
VIDEO L R R CENTER R R
100 English
FRONT
L
POWER
R
¶
Front Preout
- Audio left output (White)
- Audio right output (Red)
¶
Rear Preout
- Audio left output (White)
- Audio right output (Red)
¶
Sub-woofer (Mono) Preout
- Audio left output (White)
- Audio right output (Red)
¶
Center Preout
¶
Audio/Visual Output
- Visual output (Yellow)
- Audio left output (White)
- Audio right output (Red)
¶
Audio/Visual input 2
- Visual input (Yellow)
- Audio left input (White)
- Audio right input (Red)
¶
Audio/Visual input 1
- Visual input (Yellow)
- Audio left input (White)
- Audio right input (Red)

Installation

Installation for Monitor/Player Unit
Firewall or metal support
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Metal mounting strap
(commercially available)
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (eg, the sound may skip).
Installation for Receiver unit
1. Attach the installation brackets 0 to the sides of the
hideaway unit using the sems bolts 8.
2. Use the tapping screw 9 to secure the hideaway unit to the
audio board.
Bend the tabs of the mounting sleeve
with a screwdriver or similar utensil
and attach it in place.
Accessory 6
Sems bolts (M4 × 8 mm)
(Accessory 8)
Installation brackets
(Accessory 0)
Tapping screw (ø4 × 16 mm)
(Accessory 9)
English 101