Appendix A - Planex BRL-04AR User Manual

4port broadband router

Table of Contents

Loading the Default Values

Once you have configured the Broadband xDSL/Cable SOHO router, the

configuration settings are saved in the Broadband xDSL/Cable SOHO

router's internal memory unless you manually reset them by using the web

browser or the ISS Config utility. Alternatively, you may use the following

steps to load the settings to factory defaults.

(1) Power off the Broadband xDSL/Cable SOHO router.

(2) After power on, the Status indicator will flash 5 times. And then hold

down the reset button on the Broadband xDSL/Cable SOHO router.

Meanwhile, the orange LED mark as Status will flash 1 time long and

then 4 times short.

(3) Now the factory defaults are loaded.

(4) Done.

Appendix A

Table of Contents