Rodgers MR-200 Owner's Manual page 16

Song Player/Recorder
Power connections & switching the
MR-200 on and off
After establishing the above connections, you
need to connect the supplied adapter to the
MR-200's DC IN socket:
To an external module.
A Wind the adapter cord round the hook to
its right to prevent accidental disconnec-
tion of the adapter cable during operation.
B Insert the small adapter plug into the DC
IN socket on the MR-200's rear panel.
C Connect the big plug to a suitable wall out-
let (see the label on the adapter's plug).
D If you are also using an external module
with a DC IN socket (a Rodgers MX-200,
for example), connect that socket to the
MR-200's REMOTE EXTERNAL DC OUT
socket using the supplied cable.
If you also want to connect the PHONES socket to
an external amplifier, mixing console, etc., be sure
to read the note in the gray box on page 6.
E Press the POWER button on the external
module.
This ensures that the module is switched on
when you power on the MR-200. (The
external device doesn't come on yet.)
16
Connect the supplied
adapter here.
F Press the MR-200's [POWER] button to
switch it on.
The module whose DC IN socket you con-
nected to the REMOTE EXTERNAL DC
OUT socket also comes on.
Press the [POWER] button again to switch the
MR-200 (and the connected module) back
off again.