Program play
36
You can listen to the desired tracks of the current CD or VCD in any desired order.
Program Edit
1
Insert a disc and close the tray.
2
Press P.MODE key to enter the Program edit
mode.
3
Select specific track by press Cursor up/down
(5/∞) keys.
4
Press ENTRE key to register selected value
onto Program list.
5
You can select maximum 30 values by repeating
step 3 - 4.
6
Press Cursor right (3) key.
The programmed track you selected last is highlighted on
the program list.
7
Select the track you want to start playing on the
Program list.
÷ Press TOP MENU to move to the next page.
÷ Press MENU to move to the previous page.
8
Press PLAY key to start.
Playback begins in the order in which you programmed
tracks. Playback stops after all of the tracks on the
Program list have played once.
0
Program edit screen appears.
Example of CD playback
CD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
TRACK 8
÷ MP3/WMA program playback
÷ The unit stops when the STOP (7) key is pressed. To restart
program play, press the PLAY key.
÷ Press P.MODE key to exit the Program edit mode.
P.B.C. on mode of VCD, the Program play function
Note
Note
*
does not work.
To repeat program play
During program playback, press the REPEAT
key on the remote.
Each press the key switches the mode.
1 "TRACK" : repeats the current track.
2 "ALL" : repeats all the tracks on programmed list.
3 "OFF" : repeat off
If you press SKIP (¢) once during Repeat Track
Note
Note
playback, the repeat playback cancels.
DVR-6300 (EN/K,P,E,X)
Lit
Program
E
Program
E
TRACK 12
TRACK 8
TRACK 10
TRACK 3
Clear All
0: 56: 18
STER.
BYPASS
Program list
Track list
q