Kyocera Mita KM-1530 Instruction Handbook Manual page 15

CHAPTER 3 PREPARATIONS BEFORE USE
When copying onto thick paper or transparencies, press the Transpar-
e n c y k e y t o l i g h t t h e i n d i c a t o r .
When using transparencies or thick paper, select "Transparencies"
l
or "Thick paper" in the 'Transparency mode" (see page 6-6) of the
d e f a u l t s e t t i n g s .
2
A d j u s t t h e i n s e r t g u i d e s t o t h e s i z e o f t h e p a p e r t o b e l o a d e d .
* W h e n l o a d i n g p a p e r t h a t i s l o n g e r t h a n
s u p p o r t g u i d e .
3-3
When loading paper into the multi-bypass, make sure that the copy
side is facing downward. (The copy side is the side facing upward
when the package is opened.)
I f t h e l e a d i n g e d g e o f t h e p a p e r i s c u r l e d , s t r a i g h t e n i t o u t b e f o r e
l o a d i n g t h e p a p e r i n t h e m u l t i - b y p a s s .
If a paper size is set for the multi-bypass, the multi-bypass may be
a u t o m a t i c a l l y s e l e c t e d i n t h e a u t o p a p e r s e l e c t i o n m o d e d e p e n d i n g o n
t h e o r i g i n a l s i z e .
* For how to set non-standard size paper width for the multi-bypass
A4R, p u l l o u t t h e
3
I n s e r t t h e p a p e r a l o n g t h e g u i d e s a s f a r a s i t w i l l g o .
f o r t h e p a p e r s e l e c t i o n , s e e d e f a u l t c o d e
COPIER MANAGEMENT on page 6-6.
1
Press and hold the Paper Select key for 3 seconds. The
I n d i c a t o r f o r t h e s i z e o f t h e p a p e r c u r r e n t l y l o a d e d i n t h e
multi-bypass lights. "F12" appears on the copy quantity
display and, 2 seconds later, a number appears.
The number displayed indicates the paper size as follows:
I: A3
2 : A 4 ( v e r t i c a l )
3: A4
4: B4
5 : B 5 ( v e r t i c a l )
6: B5
7 : F o l i o
8: U (no size setting)
xxx: Setting of non-standard size paper width for multi-
bypass
F13 i n D e f a u l t S e t t i n g s i n