Adjusting The Tone - Sony HT-DDW970 Operating Instructions Manual

Resetting sound fields to the
initial settings
Use the buttons on the receiver for the operation.
1
Press ?/1 to turn off the power.
2
While holding down 2CH, press
?/1.
"SF. CLR." appears in the display and all
sound fields are reset to the initial setting.

Adjusting the tone

You can adjust the tonal quality (bass, treble
level) of the front speakers using the TONE
menu. These settings are applied to all sound
fields.
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
2
Press MAIN MENU repeatedly to select
" TONE ".
3
Press or repeatedly to select the
parameter you want to adjust.
For details, see "TONE menu parameters"
below.
4
While monitoring the sound, press + or
– repeatedly to select the setting you
want.
The setting is entered automatically.
5
Repeat steps 3 and 4 to adjust the other
items.
Note
You cannot adjust the tone when the receiver is
decoding signals with a sampling frequency of more
than 48 kHz, or when DTS 96/24, DTS-ES Matrix or
DTS Neo:6 decoding is applied.
TONE menu parameters
x BASS XX dB
(Front speaker bass level)
x TREB. XX dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from –6 dB to +6 dB in 1 dB steps.
35 GB