Table of Contents
Advertisement
Installing the speakers on the
wall
You can install your front, surround and
surround back speakers on the wall.
1
Prepare screws (not supplied) that are
suitable for the hole on the back of
each speaker. See the illustrations
below.
more than 4 mm
more than 25 mm
4.6 mm
10 mm
Hole on the back of the speaker
2
Fasten the screws to the wall. The
screws should protrude 5 to 7 mm.
5 to 7 mm
GB
3
Hang the speakers on the screws.
Hole on the back of the speaker
4.6 mm
10 mm
Notes
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
Page 16
Hide quick links:
Advertisement
Table of Contents
