Cassette Player Features; Playing Cassette Tapes - Kenwood KRC-777R Instruction Manual

Cassette player features

44W 4
LOUD B NR SCAN B.S/RDM
B NR/BC NR
B.S
KRC-PS1077R/977R
Tape side
MTL indicator BC NR indicator
KRC-877R/877W/777R
Tape side
B NR indicator
MTL indicator
4
¡ SRC
DISP
FM
DISC
EJECT
DISP
OFF
NAME.S
T I
NF
VOL ADJ
REP D.SCN MTL/M.RDM
PROG/PTY MENU
DISC
38/PROG
REP MTL AM
¢ indicator
Mode display
¢ indicator
Mode display
¢

Playing Cassette Tapes

Loading and Playing Cassettes:
Press the ¡(EJECT) button to slide open the faceplate,
showing the cassette (insertion) slot. Holding the cassette with
the tape exposed to the right, insert it in the slot. The faceplate
will show the control panel, and the tape will start playing.
The ¢ indicator lights up when a cassette has been loaded.
Playing Cassettes Already Loaded:
Press the SRC button repeatedly until the tape mode is
obtained. "TAPE" is displayed when the tape mode has been
selected.
The tape will start playing.
Listening to the other side:
Press the PROG button.
Tape play switches to the other side.
Eject:
Press the ¡(EJECT) button to stop tape play. The faceplate
will slide to eject the tape.
Press the ¡(EJECT) button to show the control panel.
NOTE
• The sound will be temporarily muted whilst the faceplate is
moving.
• The only buttons that will work during the eject state are the
¡(EJECT), SRC, TI and ATT buttons, as well as the volume
control button.
• Remove a cassette from the unit when not listening to it for a
whilst. If you leave it in the unit too long, the tape may stick to
the tape head and cause the unit to malfunction.
— 19 —