SoftBank 932SH Starter Manual page 259

S! Circle Talk
Initiating S! Circle Talk
Follow these steps to send S! Circle Talk
requests to members:
Set My Status to Online first (P.10-9).
1
I
2
Select member or Group S %
3
% S Transmission starts
. S! Circle Talk starts when request is
accepted by a receiver.
. Loudspeaker activates automatically.
10
Direct Entry
Enter phone number S I S % S
Transmission starts
Advanced
0
(Disabling Loudspeaker (Exiting S! Circle Talk for incoming calls (P.10-21)
12
10-
S! Circle Talk Operations
[ Speaking
1
Press and hold I when
Press and Hold h appears
S You have the floor
. h:My Turn appears when you have
the floor.
2
Keep holding I to speak
S Release I S Floor is
released
. Warning tone sounds before time limit.
Incoming Calls during S! Circle Talk
. Incoming calls are rejected. Set handset
to exit S! Circle Talk to answer incoming
calls as needed.
Canceling Loudspeaker
During S! Circle Talk, %
, To reactivate, follow these steps:
% S While message appears, %
[ Exiting S! Circle Talk
1
" S Connection ends
. S! Circle Talk ends automatically
when there is only one participant
left, including yourself.
Rejoining S! Circle Talk
c/d S Select most recent S! Circle
Talk record S B S Rejoin Circle
Talk S %
, An error message appears when S! Circle
Talk has ended or maximum number of
participants are already engaged.
Accepting S! Circle Talk Request
1
While handset is ringing/
vibrating, ! S S! Circle
Talk starts
. Alternatively, press I.
. S! Circle Talk Operations: left