Start−Up And Performance Checklist - Lennox Merit Series13HPD Units Installation Instructions Manual

Start−Up and Performance Checklist
Customer
Indoor Unit Model
Outdoor Unit Model
Notes:
START−UP CHECKS
Refrigerant Type:
Rated Load Amps
Condenser Fan Full Load Amps
COOLING MODE
Vapor Pressure:
Supply Air Temperature:
HEATING MODE
Vapor Pressure:
Supply Air Temperature:
System Refrigerant Charge (Refer to manufacturer's information on unit or installation instructions for required subcooling and
approach temperatures.)
Subcooling:
Saturated Condensing Temperature (A)
minus Liquid Line Temperature (B)
Approach:
minus Outdoor Air Temperature (B)
Indoor Coil Temp. Drop (18 to 22°F)
minus Supply Air Temperature (B)
505361M 09/07
Actual Amps
Actual Amps:
Liquid Pressure:
Ambient Temperature:
Liquid Pressure:
Ambient Temperature:
Liquid Line Temperature (A)
Return Air Temperature (A)
Address
Serial
Serial
Rated Volts
Return Air Temperature:
Return Air Temperature:
A
A
A
Page 22
Actual Volts
B SUBCOOLING
=
B APPROACH
=
B COIL TEMP DROP
=