Spyclops SPY-DVR4960 Instructions Manual page 14

3.8 Sensor Setup:
OUT OUT COM
One sensor wire goes into 1- 4 and the other sensor wire goes into COM
•
Channel: Select port 1- 4 to configure.
•
Work Mode:
• With "N/Open" the recording will start when the sensor disconnects from the base.
• With "N/Close" the recording will start when the sensor connects with the base.
• Alarm duration: Sets the amount of time that the alarm sounds from 1 second to 10 seconds.
Select "continued" for a longer buzzer.
•
Record channel: Set which channel you want to record when the sensor is triggered.
*Note: will record for approximately 30 seconds from time of activation.
•
Copy To: To copy settings to another camera, or all cameras. Select the sensor that you want
to match the settings from the drop down and click the "Copy to" button before
selecting "Ok".
COM 4 3 COM COM 2 1
14