Dvd Audio Setting - Sylvania LD320SS8 Owner's Manual

S
ETTING DVD

DVD Audio Setting

Choose the appropriate audio settings for your equipment. It only affects
during the playback of DVD.
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "DVD", then press [ENTER].
3
Use [Cursor s / B] to select "
4
Use [Cursor K / L ] to select the desired item, then press
[ENTER].
5
Use [Cursor K / L ] to select the desired item, then press
[ENTER].
[DRC] (dynamic range control)
Set "DRC".
This function is available only on the discs which are
recorded in the Dolby Digital format.
ON : Compress the range between soft and loud
sounds.
OFF : No effects (original sound).
40
EN
Setup
Setup
Press "ENTER" key to move to DVD Setup.
", then press [ENTER].
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER
(Default: ON)
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER
[DOWN SAMPLING]
Set "DOWN SAMPLING".
This function is available only on digital outputting of a
disc recorded in 96kHz.
ENTER
ON : When outputting in 48kHz.
OFF : When outputting the original sound.
Note:
• When playing back a 96 kHz disc with the copyright
protection or when virtual surround is set to "1" or "2", the
sound will be down sampled at 48 kHz even if the "DOWN
SAMPLING" is set to "OFF".
[DOLBY DIGITAL]
Set to "BITSTREAM" when this unit is connected to a
Dolby Digital decoder. Available on DVD only.
ENTER
BITSTREAM : Outputs Dolby Digital signals.
PCM : Converts the Dolby Digital into PCM.
(2 channel)
6
Press [SETUP] to exit.
(Default: ON)
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
(Default: BITSTREAM)
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM