Table of Contents
Advertisement
Instructions
Connect Antenna Elements
The Bauhn Outdoor Antenna comes pre-installed with 26 antenna elements.
There are an additional 6 elements that should be installed first for optimal
reception.
1.
Attach the antenna elements to the main body by inserting each element,
then securing with the small screws supplied in the pack.
2.
Following the diagram below, start with the largest antenna element at the
end with the cable outlet, and work up the length of the antenna.
Tip: Stagger the top/bottom placement of the antenna elements for best
reception coverage.
Once the antenna elements have all been attached, your antenna is ready for
mounting.
After Sales Support - Help Desk
Telephone:
1300 663 907
Internet:
www.winplus.com.au
7
Advertisement
Table of Contents
