Table of Contents
Advertisement
Parts List
•
1 x Outdoor Antenna
•
1 x 12m Antenna Cable
•
6 x Antenna Element Screws
•
4 x Masonry Anchors
•
2 x Mounting Bolts & Washers
•
4 x Wood Screws
•
2 x Wing Nuts & Washers
Technical Specifications
Frequency:
Gain: VHF:
Polarization:
Impedance:
Connector:
Dimensions:
Installation Tips
1.
When installing, take note of the direction of your nearby antennas.
You can get a good idea of the best direction to face your antenna by
looking at those around you.
2.
If you are replacing an already mounted antenna, take note of the height
and direction of the old antenna to get a good idea of where to start.
3.
Before permanently installing your antenna you should always check the
quality of the reception on your TV.
4.
The mounting pole will give you an additional ~480mm of height when
mounted on the bracket. You should note the height of your other
antennas nearby to ensure that the ~480mm height allowed by the
Bauhn Outdoor Antenna kit is sufficient.
5.
The Bauhn Outdoor Antenna Kit comes with a 12m coax cable with
a F-Type connector. This is a standard antenna cable. If you require
additional cable length, you should contact your local electrical supplier.
6.
The behaviour of your antenna can be affected by nearby large metallic
objects, such as air conditioning units. Identify these objects in your
installation situation and install the antenna away from these objects.
7.
If you live in a very low lying area or if there is a large obstruction
between your installation point and the broadcast location, you may
receive little or no signal at all.
6
•
•
•
•
•
•
VHF (174-230MHz), UHF (526-820MHz)
Up to 5dBi, UHF: up to 7dBi
Horizontal
75Ω
F-Connector
~1244 x 945 x 60mm
1 x Mount Faceplate
1 x Mounting Pole
6 x Antenna elements
1 x Manual
1 x Warranty Card
2 x Warranty Stickers
After Sales Support - Help Desk
Telephone:
Internet:
1300 663 907
www.winplus.com.au
Advertisement
Table of Contents
