Operation Of The Led Lights And Screen Depending On Selected Options - XCEL HD User Manual

Configuration modes

OPERATION OF THE LED LIGHTS AND SCREEN DEPENDING ON SELECTED OPTIONS

REMOTE DEL
CONTROL LIGHTS
OPTION OPTION
• The 4 LED lights flash every 2 seconds to indicate
that the camera is waiting for the signal from the
remote control (when the video, photo or time
Enabled
lapse mode is shown on the screen).
( )
• The screen turns off after 1 minute of inactivity
ENABLED
(ENERGY SAVING)
OK button.
*
(
• The LED on the back flashes every 2 seconds to
and
indicate that the camera is waiting for the signal
)
from the remote control (when the video, photo or
Disabled
time lapse mode is shown on the screen).
• The screen turns off after 1 minute of inactivity
( )
(ENERGY SAVING)
the OK button.
Enabled
• The camera turns off after 2 minutes of inactivity
(AUTO SHUT DOWN).
( )
DISABLED
( )
Disabled
• The camera turns off after 2 minutes of inactivity
(AUTO SHUT DOWN).
( )
*
See note on next page p.13
OPERATION OF THE LED LIGHTS AND SCREEN
BEFORE RECORDING VIDEOS/PHOTOS
. To return to the screen, press the
. To return to the screen, press
OPERATION OF THE LED LIGHTS AND SCREEN
WHEN RECORDING VIDEOS/PHOTOS
• The 4 LED lights flash rapidly.
Video/
• The screen turns off after 5 seconds
Time lapse
(ENERGY SAVING).
ENERGY
SAVING
Photo • The 4 LED lights flash rapidly.
• The LED light on the back flashes
Video/ rapidly.
Time lapse • The screen turns off after 5 seconds.
(ENERGY SAVING)
• The LED light on the back flash twice.
ENERGY Photo
SAVING
• The 4 LED lights flash rapidly.
Video/
• The screen turns off after 5 seconds
Time lapse
(ENERGY SAVING).
AUTO
SHUT
DOWN
Photo • The 4 LED lights flash rapidly.
• The LED light on the back flashes
Video/ rapidly.
Time lapse • The screen turns off after 5 seconds
(ENERGY SAVING).
AUTO
SHUT
DOWN
Photo • The LED light on the back flash twice.
12
.
ENERGY
SAVING
ENERGY
SAVING
ENERGY
SAVING
ENERGY
SAVING