Connecting The Xm Terminal; Connecting The Ipod - Denon DRA-297 Operating Instructions Manual

ENGLISH
connections Connections
Connecting the XM terminal Connecting the iPod®
• DRA-297 is the XM Ready® receiver. You can receive XM® Satellite Radio by connecting to the XM
Passport System (sold separately) and subscribing to the XM service.
• Plug the XM Passport System into XM terminal on the rear panel.
• Position the XM Passport System near a south-facing. window to receive the best signal.
For details, see "XM Satellite Radio"
(~page
15).
When making connections, also refer to the operating instructions of the XM Passport System.
When using an iPod, you must connect the Control Dock for iPod (ASD-1 R, sold separately) and the DOCK
CONTROL jack on the DRA-297 with a mini-jack and assign the iPod to any AUDIO terminal(s).
The diagram below shows an example of connections for when the iPod is assigned to the CD-RfTAPE
terminals.
*
For instructions on assigning the iPod to a specific terminal, see "Setting the iPod Assignment" (~
page 16).
*
For instructions on playing the iPod, see "Playing the iPod"
(~page
16).
XM Passport System
~~~----------cCt ~(
fit
'-------Cl-::::>--t~
, . - - - iPod -------..
~ ' J r - - a -
---'l
NOTE:
• Keep the power supply cord unplugged until the XM Passport System connection has been
completed.
AUDIO OUT
• The XM name and related logo are registered trademarks of XM Satellite Radio Inc. All rights
reserved.
• XM Ready is a registered trademark of XM Satellite Radio Inc. All rights reserved.
Monitor
(8 VIDEO IN)
• The optional standard Control Dock for iPod is DENON ASD-1 R sold separately.
10
ENGLISH