Cobra MPC SERIES Installation & Programming Manual page 5

COBRA INSTALLATION AND PROGRAMMING GUIDE
4) Remove the Latch Guard From the Retractor:
Remove and retain the screw that secures
•
the latch guard to the retractor.
Remove and retain the latch guard.
•
5) Install the Retractor:
From the inside of the door, slide retractor (a) into 2-18" hole.
•
IMPORTANT: Make sure latch tabs engage with retractor jaws.
See Detail A.
6) Install the Latch Guard:
Install latch guard (a) onto retractor.
•
Secure latch guard with screw.
•
57010-H Page 5
Installing the Cobra
outside
outside
a
12-19-2005
inside
a
inside