Driving; Starting; Positions Of The Ignition; Preparing To Start Your Vehicle - Ford 2006 Mariner Hybrid Owner's Manual

Hide thumbs Also See for 2006 Mariner Hybrid:
Table of Contents

Advertisement

Driving

STARTING

Positions of the ignition

1. LOCK, locks the gearshift lever
and allows key removal.
2. ACCESSORY, allows the electrical
accessories such as the radio to
operate while the vehicle is not
running.
3. RUN, all electrical circuits
operational and warning lights will
illuminate. This is the position the
key is in when you're driving.
4. START, starts the engine, vehicle and electrical power systems.

Preparing to start your vehicle

Engine starting is controlled by the electronically-controlled
Continuously Variable Transaxle (eCVT). For more information on
starting the vehicle, refer to Starting the vehicle in this chapter.
Extended idling at high engine speeds can produce very high
temperatures in the engine and exhaust system, creating the risk
of fire or other damage.
Do not park, idle, or drive your vehicle in dry grass or other dry
ground cover. The emission system heats up the engine
compartment and exhaust system, which can start a fire.
Do not start your vehicle in a closed garage or in other enclosed
areas. Exhaust fumes can be toxic. Always open the garage door
before you start the engine. See Guarding against exhaust fumes in
this chapter for more instructions.
If you smell exhaust fumes inside your vehicle, have your dealer
inspect your vehicle immediately. Do not drive if you smell
exhaust fumes.
Important safety precautions
When the engine starts, the idle RPM runs faster to warm the engine. If
the engine idle speed does not slow down automatically, have the vehicle
checked.
206
2006 Mariner Hybrid (mhv)
Owners Guide (post-2002-fmt)
USA (fus)

Advertisement

Table of Contents
loading

Table of Contents