Advertisement
1. Plug the Wireless AC Range Extender into a wall socket. Connect your
computer/laptop to the AP/Router using the RJ45 Cable.
2. Follow processes 3 to 7 of the previous section.
Using the AP Mode to obtain a "Wireless Access Point".
The wireless end devices will connect to the Wireless
AC Range Extender in this mode. You can also use this
mode, for example, to make a formerly non-wireless-
enabled router wireless-enabled.
1. The mode selector must be set to the "Wireless AC Range Extender"
position for AP mode.
2. Plug the Wireless AC Range Extender into a wall socket.
3. Follow processes 2 to 4 from the previous configuration instructions.
4. After logging in, you will see the web page below. Click on the AP button
in the wizard.
5. The following message will be displayed on your browser.
SSID
Security Type
Security Key
Click the 'Apply" button, then the Wireless AC Range Extender will restart.
After the reboot has completed, the Wireless AC Range Extender is accessible
under the SSID and the Wireless Key.
Wireless SSID of the Wireless AC Range Extender.
Setup the wireless security and encryption to prevent
unauthorized access and monitoring. Supports 64/128-bit
WEP, WPA, WPA2, WPA/WPA2 encryption methods.
The "Password" of the Wireless AC Range Extender.
6
Advertisement
