Related Manuals for Kogan KARPRWL11ACA
Summary of Contents for Kogan KARPRWL11ACA
- Page 2 Open Source Code........................2 Introduction............................2 Package Contents.........................2 Hardware Overview..........................2 LED Indicators..........................3 Getting Started...........................3 Setting Up Wireless Infrastructure Network ..............3 Configuring Wi-Fi Repeater Mode.....................4 Configuring the Wi-Fi Repeater Mode Wirelessly............4 Configuring the Wi-Fi Repeater Mode with RJ45 Cable..........6 Configuring the Wireless AP Mode....................6...
- Page 3 This product includes software codes developed by third parties. These software codes are subject to either the GNU General Public Licence (GPL), Version 2, June 1991 or the GNU Lesser General Public Licence (LGPL), Version 2.1, February 1999. You can copy, distribute and/or modify in accordance with the terms and conditions of GPL or LGPL.
- Page 4 : The device is receiving power. : The device is not receiving electrical power. : The Ethernet Port is connected. : The Ethernet Port is disconnected. : Transferring data to/from a network device. : Wireless signal : WPS connection is established or WPS signal of another device is expected.
- Page 5 This is the easiest way to configure the Wireless AC Range Extender. Firstly, check whether your wireless router supports WPS. For further details, please read the operating instructions for your wireless router. 1. The mode selector must be set to the “Wireless AC Range Extender” position for repeater mode.
- Page 6 are not sure, you can press the RESET button on the router for 8 seconds to clean all the settings back to default, then try again. 4. The login screen below will appear. Enter the User Name and Password, then click “Submit” to login. The default User name is “admin” and the Password is “admin”.
- Page 7 1. Plug the Wireless AC Range Extender into a wall socket. Connect your computer/laptop to the AP/Router using the RJ45 Cable. 2. Follow processes 3 to 7 of the previous section. Using the AP Mode to obtain a “Wireless Access Point”. The wireless end devices will connect to the Wireless AC Range Extender in this mode.