Summary Of System Status Displays - ADEMCO 4110DL User Manual

SUMMARY OF SYSTEM STATUS DISPLAYS

AWAY All burglary zones, interior & perimeter,
are armed.
S T A Y Perimeter burglary zones, such as windows
and doors are armed.
INSTANT Perimeter burglary zones armed and
entry delay is turned off.
B Y P A S S One or more burglary protection zones
have been bypassed.
NOT READY Appears when burglary portion of the system
is not ready for arming (due to one or more
open protection zones).
R EAD Y The burglary portion of the system
is ready to be armed.
NO AC Appears when AC power has been cut off.
System is operating on backup battery power.
A C Appears when AC power is present.
CHIME Appears when the CHIME feature is ON.
B A T Low system battery
(if no zone number is shown), or
Low battery condition in a wireless sensor
(if zone number is also shown).
ALARM Appears when an intrusion has been detected and the system is armed (also appears
during a fire alarm). Accompanied by the ID # of the protection zone in alarm.
C H E C K Appears when a malfunction is discovered in the system at any time or if a fault is
detected in a FIRE zone at any time or in a DAY(Trouble)/NIGHT(Alarm) burglary zone
during a disarmed period. Accompanied by a display of zone number in trouble.
F I R E Appears when a fire alarm is present. Accompanied by a display of the zone in alarm.
00 00 AWAY
00
STAY
INSTANT
ALARM
BYPASS
CHECK
FIRE
00
AWAY
AWAY
00
BYPASS
STAY
ALARM STAY
ALARM
FIRE
FIRE
CHECK INSTANT
FIXED-WORD KEYPAD DISPLAYS
– 7 –
NO AC
CHIME
BAT
NOT READY
STYLE A
NO AC
NOT READY
CHIME BAT
STYLE B