Download Print this page

Dell 3300MP User Manual page 29

Hide thumbs Also See for 3300MP:

Advertisement

Run "Self-diagnostic test" (see "
l
the colors of the test pattern are correct.
 Image is out of focus
Adjust the focus ring on the projector lens.
l
Ensure that the projection screen is within the required distance from the projector (3.9ft [1.2m] to 39.4ft [12m]).
l
 The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect ratio to full screen with a 4:3 (letter-box) default setting.
If the image is still stretched, adjust the aspect ratio as follows:
If you are playing a 16:9 DVD, select 4:3 aspect ratio type on your DVD player if capable.
l
If you cannot select 4:3 aspect ratio type on your DVD player, select 4:3 aspect ratio in the "All Images" menu within the
l
OSD function.
 Image is reversed
Select
Management
from the OSD and adjust the projection mode.
l
 Lamp is burned out or makes a popping sound
When the lamp reaches its end of life, it may burn out and may make a loud popping sound. If this occurs, the projector will
l
not turn back on, and will display "Lamp Defective" in the LCD display until the lamp is replaced. To replace the lamp, see
"Changing the
Lamp".
 Self-diagnostic for video
Dell 3300MP Projector provides self-diagnostic test of the projector video display (for Video, S-video, Component-i). Use this
l
advanced feature for preliminary self-diagnostic on your projector when encountering a display problem for video.
After turning on the projector, press "+" and "-" buttons on the control panel simultaneously and release the buttons when
l
screen goes blank.
Press "+" and "-" buttons again to exit the diagnostic mode.
l
While in Self-diagnostic mode, the screen will run a seven-color-cycle test as following: "Red--> Green--> Blue--> White-->
l
Watchet Blue--> Dark Green--> Yellow." Ensure that the colors of the test pattern are correct. Contact Dell if the colors are
not displayed correctly.
 
 The remote control is not operating smoothly or operating in very limited range
The battery may be low. Check if the laser beam transmitted from the remote is too dim. If so, replace with 2 new AA batteries.
 
Back to Contents Page
 
Self-diagnostic for video
") for preliminary diagnostic on image color problem. Ensure that
http://www.pureglare.com.au

Advertisement

loading