Timer Function - Samsung MAX-DX55 Instruction Manual

Timer Function

•
•
•
•
Example: You wish to wake up to music every morning.
1
Switch the system
on by pressing
STANDBY/ON.
4
Set the timer
switch-on time.
a. Set the hour by pressing
button.
b. Press ENTER .
•
The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
•
OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switch-
off time already set; you can now
set the timer switch-off time.
Press or button
7
to select the source to
be played when the
system switches on.
•
TAPE (cassette) : Insert a cassette
•
TUNER (radio) : a Press ENTER.
•
CD (compact disc) : Load a compact
•
USB:Insert USB.
Note
53
Downloaded From Disc-Player.com Samsung Manuals
The timer enables you to switch the system on or off at specific times.
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
2
5
or a. Set the hour by pressing
b. Press ENTER.
or c. Set the minutes by pressing
d. Press ENTER.
8
tape.
b Select a preset
station by pressing
or .
disc.
•
If the timer switch on and off times are identical, the word ERROR is displayed.
•
You can also use Multi Jog or
Press
TIMER/CLOCK
until TIMER is
displayed.
Set the timer
switch-off time.
button.
•
The minutes flash.
button.
•
VOL 10 is displayed, where 10
corresponds to the volume
already set.
Press ENTER to
confirm the timer.
button to instead
Press the ENTER
3
button.
•
ON TIME is displayed (instead
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
Press
6
to adjust the volume
level and press
ENTER.
•
or
The source to be selected is
displayed.
or
Press
9
STANDBY/ON to
set the system to
standby mode.
•
is displayed to the top right of
the time, indicating that the timer
has been set.
•
The system will switch on and off
automatically at the required
times.
, button on the remote control in step 4,5,6,7.
or button