Chart Of Osd Adjustment Functions - CASP ELEKTRONIK MAL15776 User Manual

Charts of OSD Adjustment Functions
When you enter the OSD you first come to the menu for selection of input so, if you have 2
sources connected (i.e. PC and camera) you can quickly switch from one source to the other.
When you click on another source you will leave the OSD system. If you want to proceed to the
regular Main Menu you must choose "MAIN MENU".
Source selection
• DVI-I VGA
• DVI-I DVI
• VIDEO S-video
• VIDEO BNC
• MAIN MENU
Main menu
Exit
Auto setup *1
Image OK?
Brightness
Contrast
Display *1
H. Position
V. Position
Hue *2
Color mode
Cool
Neutral
Warm
User
Clear base Barten
Clock/phase *1
Clock
Phase
Saturation *2
Black level
Selects VGA
Selects DVI
Selects S-video
Selects Composite video
Continue to Main Menu
Exit OSD Menu, in sub menus 'Exit' will move you up in the tree structure.
Adjust monitor to analog signal from graphics card.
If you answer YES then you will exit the menu. If you answer NO, proceed to Clock /
Phase menu.
Adjust brightness level. See also special note on brightness adjustment in special
situations.
Adjust contrast of the monitor. Not active when Clear base Barten color mode has
been selected.
Adjust horizontal screen position.
Adjust vertical screen position.
Adjust the hue of the color settings.
Select a cold color temperature of about 9000K.
Select a neutral color temperature of about 6500K.
Select a warm color temperature of about 5500K.
In a separate sub-menu you can set individual values for Red, Green and Blue.
A special color mode intended for viewing of X-ray pictures. Has a preset greyscale
curve in accordance with the DICOM standard. Automatically sets the monitor to
brightness of about 170 candela and color temperature of about 6500K. When set to
this mode the OSD functions for Brightness, Contrast, Black Level are in-activated. It
also locks ALC to ON.
Fine tune video signal for positioning of the picture horizontally on the screen.
Adjust Phase frequency to control flickering or horizontal waves on the screen.
Adjust the saturation of the color settings.
Adjust the offset level for black color, inactive when Clear Base Barten color mode is
selected.
16