Input Signals - CASP ELEKTRONIK MAL15776 User Manual

Input signals

No tools are required to connect the LCD monitor to your PC or other device. Simply follow the
instructions outlined in the next few pages.
Connectors for the signal cables and power are located on the back of the panel behind the cover
lid. Please refer to the diagram on the next page for the connector configuration.
Connect Power Adapter and Cable
Connect the round shape plug end of the AC/DC adapter to the DC Power input connector of the
LCD monitor. Connect the female end of the power cable to the AC power input receptacle on the
AC/DC adapter. Then, plug the male end of the power cable into an grounded AC outlet.
Make sure you use the AC to DC adapter delivered with the product.
Caution
Connect Signal cable
On next page you can see which input connectors there are available on your monitor and which
cable you should connect depends on your source for the input signal.
VGA, DVI, HDMI or Displayport output from a PC
If your source is VGA (analog) then use either a VGA to VGA cable for connection to the VGA
connector or a VGA to DVI-I cable for connection to the DVI-I connector on the monitor.
If your source is DVI (digital) then use the DVI-DVI cable supplied with the monitor and connect to
the DVI-I connector on the monitor.
If your source is HDMI or Display-Port then you need a converter from HDMI or Display-Port to
DVI. Then you connect the DVI-DVI cable between the DVI-I connector on the monitor and the
converter. There are also available HDMI or Display-Port to DVI cables that can purchased from
your local reseller.
Video input from camera or other NTSC/PAL signal generating equipment
Use S-video cable or for Composite video, BNC cables.
Connect Audio Cable
Connect an audio output device to the monitor with the included stereo mini cable, using the 9mm
audio jack.
RJ45 Connector
If you want to control the On/Off and OSD at a distance from the monitor there is an optional
external control box available. This box is connected with an RJ45 cable.
When you disconnect the cord /cables, be sure to hold the connector and not the
cable itself. Also make sure you use cables and connectors of high quality.
Caution
12