ASROCK Z97 Extreme6/ac User Manual page 34

ATX Power Connector
(24-pin ATXPWR1)
(see p.7 or p.8, No. 7)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.7 or p.8, No. 1)
PCIe Power Connector
(4-pin PCIE_PWR1)
(see p.7 or p.8, No. 30)
HDD Saver Connector
(4-pin SATA_PWR_1)
(see p.7 or p.8, No. 22)
hunderbolt AIC
Connector
(5-pin TB1)
(see p.7 or p.8, No. 28)
Serial Port Header
(9-pin COM1)
(see p.7 or p.8, No. 31)
28
his motherboard pro-
12 24
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
1 13
his motherboard pro-
8 5
vides an 8-pin ATX 12V
power connector. To use a
4 1
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
Please connect a 4 pin molex
power cable to this connector
when more than three graphics
GND
cards are installed.
+12V DETECT
Please connect the HDD Saver
Cable to this connector to
1
manage the power state of HDD.
Please connect a hunderbolt™
add-in card (AIC) to this
connector via the GPIO cable.
RRXD1
his COM1 header
DDTR#1
DDSR#1
CCTS#1
supports a serial port
module.
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1