ASROCK Z97 Extreme6/ac User Manual page 105

Z97 Extreme6/ac / Z97 Extreme6
HDD Saver Technology
Set [Enabled] to switch on the HDD Saver. Set [Disabled] to switch of the HDD Saver.
It is recommended to enable the AHCI Mode to fully support the HDD Saver. You can also
enable/disable the HDD Saver via the HDD Saver application under your OS.
Onboard SATA Power Switch (SATA_PWR_1)
Set [Power On] to switch on the onboard SATA Power Connector. Set [Power Of] to
switch of the onboard SATA Power Connector.
Re-detect SATA Power Connection
Re-detect your SATA Power connection. It is recommended to proceed the re-detection
for any changes of your HDD coniguration. You can also proceed the re-detection via the
HDD Saver application under your OS.
System Browser
ASRock System Browser shows the overview of your current PC and the devices
connected.
OMG (Online Management Guard)
Administrators are able to establish an internet curfew or restrict internet access
at speciied times via OMG. You may schedule the starting and ending hours of
internet access granted to other users. In order to prevent users from bypassing
OMG, guest accounts without permission to modify the system time are required.
UEFI Tech Service
Contact ASRock Tech Service if you are having trouble with your PC. Please setup
network coniguration before using UEFI Tech Service.
Easy RAID Installer
Easy RAID Installer helps you to copy the RAID driver from the support CD to
your USB storage device. Ater copying the drivers please change the SATA mode to
RAID, then you can start installing the operating system in RAID mode.
Easy Driver Installer
For users that don't have an optical disk drive to install the drivers from our support
CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver
to your system via an USB storage device, then downloads and installs the other
required drivers automatically.
99